Home - Products - Ball Bearings - Deep groove ball bearings - Miniature ball bearings - Flange type with shields - F62,Z,ZZ Series

F62,Z,ZZ Series

Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings. Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided
  Very good Good Normal Limited Not suitable/applicable  
   
             
Radial loadability Quiet running
Axial loadability in both directions Tapered bore
Length compensation within the bearings Seal at one or both sides
Length compensation with sliding fit High rigidity
Seperable bearings Low friction
Compensation misalignment Locating bearings
Increased precision Floating bearings
Suitability for high speeds    
Total  16 records
Boundary dimensions(mm)Basic load ratings(kN)Limiting speeds(rpm)Mass(Kg)Bearing Number
dDBD1C1rs minCrCorGreaseOil(Approx.)PRB
310411.510.1564022450,00058,0001.8F623
310411.510.1564022450,00058,0001.8F623C3
310411.510.1564022450,00058,0001.8F623-Z
310411.510.1564022450,00058,0001.8F623-ZZ
41351510.21,31049042,00049,0003.5F624
41351510.21,31049042,00049,0003.5F624C3
41351510.21,31049042,00049,0003.5F624-Z
41351510.21,31049042,00049,0003.5F624-ZZ
51651810.31,76068037,00044,0005.2F625
51651810.31,76068037,00044,0005.2F625C3
51651810.31,76068037,00044,0005.2F625-Z
51651810.31,76068037,00044,0005.2F625-ZZ
6196221.50.32,34088534,00040,0009.2F626
6196221.50.32,34088534,00040,0009.2F626C3
6196221.50.32,34088534,00040,0009.2F626-Z
6196221.50.32,34088534,00040,0009.2F626-ZZ
Total  16 records