Home - Products - Ball Bearings - Deep groove ball bearings - Miniature ball bearings - Open type - 67 Series

67 Series

Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings. Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided
  Very good Good Normal Limited Not suitable/applicable  
   
             
Radial loadability Quiet running
Axial loadability in both directions Tapered bore
Length compensation within the bearings Seal at one or both sides
Length compensation with sliding fit High rigidity
Seperable bearings Low friction
Compensation misalignment Locating bearings
Increased precision Floating bearings
Suitability for high speeds    
Total  17 records
Boundary dimensions(mm)Basic load ratings(kN)Limiting speeds(rpm)Mass(g)Bearing Number
dDBrs minCrCorGreaseOil(Approx.)PRB
2.551.50.0815359.070,00082,0000.1167/2.5
2.551.50.0815359.070,00082,0000.1167/2.5C3
241.20.0510437.083,00098,0000.06672C3
3620.0824294.060,00071,0000.2673
3620.0824294.060,00071,0000.2673C3
4720.0822288.054,00063,0000.28674
4720.0822288.054,00063,0000.28674C3
5820.0821791.049,00057,0000.32675
5820.0821791.049,00057,0000.32675C3
6102.50.146519643,00051,0000.65676
6102.50.146519643,00051,0000.65676C3
7112.50.155526940,00047,0000.67677
7112.50.155526940,00047,0000.67677C3
8122.50.151525238,00045,0000.75678
8122.50.151525238,00045,0000.75678C3
91430.192046536,00042,0001.4679
91430.192046536,00042,0001.4679C3
Total  17 records