Home - Products - Ball Bearings - Deep groove ball bearings - Single row - Open type - 160 Series

160 Series

Deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings. Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided
  Very good Good Normal Limited Not suitable/applicable  
   
             
Radial loadability Quiet running
Axial loadability in both directions Tapered bore
Length compensation within the bearings Seal at one or both sides
Length compensation with sliding fit High rigidity
Seperable bearings Low friction
Compensation misalignment Locating bearings
Increased precision Floating bearings
Suitability for high speeds    
Total  62 . In the 3 pages,this is the   Next
Boundary dimensions(mm)Basic load ratings(kN)Limiting speeds(rpm)Mass(Kg)Bearing Number
dDBrs minCrCorGreaseOil(Approx.)PRB
122870.35.102.3926,00030,0000.01916001
122870.35.102.3926,00030,0000.01916001C3
153280.35.602.8322,00026,0000.02516002
153280.35.602.8322,00026,0000.02516002C3
173580.36.803.3520,00024,0000.03216003
173580.36.803.3520,00024,0000.03216003C3
204280.37.904.5018,00021,0000.05116004
204280.37.904.5018,00021,0000.05116004C3
254780.38.355.1015,00018,0000.0616005
254780.38.355.1015,00018,0000.0616005C3
305590.311.27.3513,00015,0000.09116006
305590.311.27.3513,00015,0000.09116006C3
356290.311.78.2012,00014,0000.1116007
356290.311.78.2012,00014,0000.1116007C3
406890.312.69.6510,00012,0000.12516008
406890.312.69.6510,00012,0000.12516008C3
4575100.612.910.59,20011,0000.17116009
4575100.612.910.59,20011,0000.17116009C3
5080100.613.211.38,4009,8000.1816010
5080100.613.211.38,4009,8000.1816010C3
5590110.618.615.37,7009,0000.25816011
5590110.618.615.37,7009,0000.25816011C3
6095110.620.017.57,0008,3000.28316012
6095110.620.017.57,0008,3000.28316012C3
65100110.620.518.76,5007,7000.30716013
65100110.620.518.76,5007,7000.30716013C3
70110130.624.422.66,1007,1000.44116014
70110130.624.422.66,1007,1000.44116014C3
75115130.625.024.05,7006,7000.46416015
75115130.625.024.05,7006,7000.46416015C3
Total  62 . In the 3 pages,this is the   Next